- Arch-general - lists.archlinux.org

[arch-general] /var/log/btmp empty
by gt 24 Feb '12

24 Feb '12

Hello folks My failed login attempts aren't being recorded, and lastb shows no output. The permissions are correct: -rw------- 1 root root 0 Nov 15 06:39 /var/log/btmp Reading a previous message on the mailing list, i tried setting FTMP_FILE /var/log/btmp in /etc/login.defs. But this gives the following error (right after typing the username on a tty): configuration error - unknown item 'FTMP_FILE' (notify administrator) So two questions: 1. Why isn't the option being recognised, even though it is present in the man page for login.defs? 2. How do i enable logging to /var/log/btmp? -- O< ascii ribbon campaign - stop html mail - www.asciiribbon.org

2 2

[arch-general] Scripting assistance
by pete 23 Feb '12

23 Feb '12

Hi .. Some i would like to do with the laptop when at home but not out and about When i am at home i would like the laptop to mount my NAS drive on boot always connect via ETH cable never wiFi but out if i connect via cable or wirless do not try to mount NAS drive , My thoughts Would it be possible to script it so that it checks for an specific MAC address before trying to mount the NAS as IP address would not work lots of 192.168.x.x networks out there Cheers Pete .

5 5

Re: [arch-general] Ways to power on broadcom bcm4311 wireless adaptor without booting into windows
by mercator 23 Feb '12

23 Feb '12

Hi Vladimir, In fact I've tried 'lspci -vnn | grep 14e4' before, and this is the output, JUST one row: 10:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02) If I just type 'lspci' I will not find anything related to wireless card either. About the kubuntu thing, did you mean this? http://ubuntuforums.org/showthread.php?t=1349025 I've read it before open this thread. My problem is just the same as that of stark222000: it's wifi card CANNOT be powered on, not that driver thing listed in archwiki or linux wireless. He solved it through booting into windows. But I don't have windows installed and I don't want to install it anymore. So I opened this thread as 'how to power on my wifi card' instead of 'my wifi card dose not work', which will of course be classified as a driver issue. And if I missed anything after my explanation, plz let me know. Thanks! On Thu, 23 Feb 2012 17:07:03 +0900, Vladimir Lomov wrote: > Hello, > ** mercator [2012-02-22 23:35:26 +0800]: > > > Hi guys, > > > After switching from Linux Mint to Archlinux, my wireless card refused to > > show up in lspci. It DOES worked fine under Linux Mint, but .... Below is > > my output of 'lspci -vnn |grep Broadcom' : > > > 10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M > Gigabit > > Ethernet PCI Express (rev 02) > > Sorry, if you find my answer a rude but did you use search engines? See > wiki.archlinux.org? E.g. > https://wiki.archlinux.org/index.php/Broadcom_wireless > > IMHO, proper command must be > $ lspci -vnn | grep 14e4 > > > My laptop is hp 6515b, with a touch panel for the toggle of wifi on/off > > etc. After a search in google I found the problem may be that the power > of > > wifi has been shut down, and solution is to boot into windows and turn > wifi > > on, because the touch panel will not work under Linux (as far as I know), > > Ah, broadcom and HP (6515b), something familiar. I remember a problem > with HP notebook with broadcom wireless card about a year or two ago. > The problem was solved by downloading kernel module source compiling > then and installing (not Archlinux, Kubuntu). > > This Google returns me for "broadcom linux bcm4311" > > http://www.broadcom.com/support/802.11/linux_sta.php > http://linuxwireless.org/en/users/Drivers/b43 > > > And the I found a software named rfkill, hoping it will work. 'rfkill > list' > > out put as follows : > > > 0: hp-wifi: Wireless LAN > > Soft blocked: yes > > Hard blocked: yes > > > After 'rfkill unblock all', I get: > > > 0: hp-wifi: Wireless LAN > > Soft blocked: no > > Hard blocked: yes > > > And still no wireless card detected. So my question is, is there any way > to > > power the wifi on without booting into windows? (in fact, windows has > > diappeared from my laptop for 3 years, and there is no partition on my > > harddisk supporting windows install). > > --- > WBR, Vladimir Lomov > > -- > FORTRAN rots the brain. > -- John McQuillin >

1 0

[arch-general] apache 2.4
by Genes MailLists 23 Feb '12

23 Feb '12

Hi Does anyone know what the plans might be for apache 2.4 in testing? Thanks! gene

2 1

[arch-general] Best way to adjust cron.daily or updatedb execution time? (root's crontab?)
by David C. Rankin 23 Feb '12

23 Feb '12

Guys, What is the best way to set the cron.daily items to run at 3 am. Currently they run at 3 pm which is a pain. I have checked the cron.daily entries and the other /etc/cron.x directories, but I can't find a time setting anywhere. I have checked man crond and crontab, but I didn't find a reference to setting the execution time globally for cron.daily stuff. I have added an entry to root's crontab: 0 3 * * * /root/cron/cron-daily Is this where this needs to go? -- David C. Rankin, J.D.,P.E.

4 8

[arch-general] Unable to shutdown recently (not always)
by XeCycle 22 Feb '12

22 Feb '12

Hello, recently I'm experiencing shutdown problems. I installed everything (except /boot) on LVM, using LXDM as the display manager and sawfish as the window manager. Usually I cannot shutdown, the computer gets stuck --- wallpaper is still there, panel is gone, so does other windows; the HDD LED may flash sometimes; neither NUM LOCK nor CAPS LOCK is responding. So I need to press the power button to force a shutdown, and, on next boot, filesystems will be recovering journal, looks like it got stuck before the filesystems unmounted. But this doesn't always happen to me, usually if the computer is used for a long time it will; but if I want to test what is the cause, i.e. startup -> do sth. -> halt, I cannot yet figure out what is the problem. This is my rc.conf (comments grepped out): --8<---------------cut here---------------start------------->8--- LOCALE="zh_CN.UTF-8" DAEMON_LOCALE="no" HARDWARECLOCK="UTC" TIMEZONE="Asia/Shanghai" KEYMAP="us" CONSOLEFONT= CONSOLEMAP= USECOLOR="yes" MODULES=(acpi-cpufreq cpufreq_ondemand tg3) UDEV_TIMEOUT=30 USEDMRAID="no" USEBTRFS="no" USELVM="yes" HOSTNAME="XeCycle" NETWORK_PERSIST="no" DAEMONS=(syslog-ng dbus @crond @networkmanager) --8<---------------cut here---------------end--------------->8--- Thanks for any help. -- Carl Lei (XeCycle) Department of Physics, Shanghai Jiao Tong University OpenPGP public key: 7795E591 Fingerprint: 1FB6 7F1F D45D F681 C845 27F7 8D71 8EC4 7795 E591

1 0

[arch-general] Current PKGBUILD that pulls directly from git?
by David C. Rankin 21 Feb '12

21 Feb '12

Guys, I've read https://wiki.archlinux.org/index.php/VCS_PKGBUILD_Guidelines regarding git and it will get me going, but does anyone know of a current PKGBUILD using git that would also be a good additional reference? -- David C. Rankin, J.D.,P.E.

4 5

[arch-general] howto build shadow 4.1.5 with share libraries enabled?
by David C. Rankin 21 Feb '12

21 Feb '12

All, I am having trouble building the new shadow (4.1.5) from ABS so that libshadow.so.0 is created and installed. I have tried modifying lib/Makefile.am like was done in 4.1.4: #Ugh, force this to build shared libraries, for god's sake sed -i "s/noinst_LTLIBRARIES/lib_LTLIBRARIES/g" lib/Makefile.am But that produces no pkg/lib at all in the build directory. I have also tried setting the --enable-share configure option, but the build fails with that option set: libtool: link: gcc -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -Wl,--hash-style=gnu -o login login.o login_nopam.o ../libmisc/libmisc.a ../lib/.libs/libshadow.a -lcrypt -lpam -lpam_misc login.o: In function `get_failent_user': login.c:(.text+0x1a): undefined reference to `getdef_bool' login.o: In function `main': login.c:(.text.startup+0x4ec): undefined reference to `getdef_unum' login.c:(.text.startup+0x517): undefined reference to `getdef_unum' login.c:(.text.startup+0x52f): undefined reference to `getdef_unum' <snip> I know /lib/libshadow.so.0 was dropped in the move from shadow 4.1.4.3-5 > 4.1.5, but is it possible to build the new shadow and have it create libshadow.so.0? If so, how? This might be basic, but obviously I'm ignorant to the solution. Thanks. -- David C. Rankin, J.D.,P.E.

3 3

Re: [arch-general] [arch-dev-public] kernel config change in testing
by Keshav P R 21 Feb '12

21 Feb '12

On Tue, Feb 21, 2012 at 23:08, Tobias Powalowski <tobias.powalowski(a)googlemail.com> wrote: > Hi > new kernel in testing has: > https://bugs.archlinux.org/task/25341 > - ext4 manages now ext2/ext3 and ext4 > > Please report if any issues happen, here all went fine on all machines. > I had not to change any config file like fstab or mkinitcpio.conf. > No x86_64 kernel https://www.archlinux.org/packages/testing/x86_64/linux/? Why is x86_64 still treated as a second class citizen? tpowa? Regards. Keshav > greetings > tpowa > > -- > Tobias Powalowski > Archlinux Developer & Package Maintainer (tpowa) > http://www.archlinux.org > tpowa(a)archlinux.org > > > >

2 1

[arch-general] Drop windowmaker-crm-git from [extra], use windowmaker package
by Daniel Isenmann 21 Feb '12

21 Feb '12

Hi, now that Window Maker development resumed and the new source for the official Window Maker package is the git repository of crm, there is no need anymore to have the crm-git package in the [extra] repository beside the official stable package. I will move it to AUR soon and will maintain it at the AUR. To all the users of the windowmaker-crm-git package, please install the windowmaker package from the [extra] repository, which is the latest stable source from windowmaker.org and even newer than the crm-git package. All features which are in the crm-git package are merged to the official windowmaker package because of the same source. -Daniel

2 1