- Arch-general - lists.archlinux.org

[arch-general] New ghostscript segfaults with hylafax?
by David C. Rankin 29 Oct '10

29 Oct '10

Guys, Ghostscript segfaults when sending faxes with hylafax: Oct 29 13:51:12 localhost kernel: gs[9456]: segfault at 8 ip 00000000007b62b0 sp 00007fff67f352a8 error 4 in gs[400000+6be000] This is with: hylafax 6.0.4-1 ghostscript 9.00-1 What do check (any logs other than everything.log?) Any tests you can think of to run? I know very little about the interplay between ghostscript and hylafax other than it either works or it doesn't. So if anybody has any ideas on how to diagnose, I welcome your thoughts. -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

1 1

[arch-general] ath9k, ar928x, monitor mode
by killall_humans＠lavabit.com 28 Oct '10

28 Oct '10

If someone have this card - please, test it. On 2.6.36 kernel monitor mode causes kernel panic, on .35 - simply doesn't work properly(channel of mon0 interface == -1). -- WBR && GTFO

3 3

[arch-general] A question about running Proftpd
by Christian 28 Oct '10

28 Oct '10

Hi all, Have just installed ProfTPD and if I run /etc/rc.d/proftpd start as root it stats just fine. In /etc/proftpd.conf it says to run the server as the group nobody and the user nobody. I am just wondering what system level it's running on? Is the server now running as root or what privilegies does it have to the system? I suppose it is not running as the root user then? Many thanks for any info, Christian

2 1

Re: [arch-general] [arch-dev-public] [signoff] glibc-2.12.1-4
by Ng Oon-Ee 27 Oct '10

27 Oct '10

On Wed, Oct 27, 2010 at 1:52 AM, Thomas Bächler <thomas(a)archlinux.org> wrote: > Am 26.10.2010 03:38, schrieb Allan McRae: >> Another day, another glibc... >> >> This adjusts the static linking fix. The one previously used is a more >> correct fix but appears incomplete. I have replaced this by a hack fix >> that Fedora uses. >> >> I will leave this in [testing] a while. My concern is the previous >> patch apparently fixed a bunch of segfault bugs in glibc and I am hoping >> that these do not get reintroduced. >> >> If only upstream made a proper fix for this. Saying upstream is doing >> not much about this bug would imply that they are doing something... > > Thomas not know bug. Computer still boot. Thomas happy. Hurray! Thomas > sign off. > Segfault detected. Happens with bauerbill's AUR component. I'll just pastebin the backtrace. --> Searching for upgradable AUR packages... *** glibc detected *** /usr/bin/perl: double free or corruption (fasttop): 0x00007fcbc826cf60 *** ======= Backtrace: ========= http://pastebin.com/mgkBjv5q

2 2

[arch-general] Screen goes black after installing latest nvidia driver
by Partha Chowdhury 26 Oct '10

26 Oct '10

Today I updated my desktop which installed latest nvidia - version 260.19.12. When I tried startx, screen went black and the led of the power button of the monitor kept flashing.After I downgraded the nvidia, everything went allright. To be absolutely sure that it is not caused by anything in my system, i installed arch again on to a new partition and installed the packages. Same results. I searched the bug tracker but found nothing.Is anybody experiencing the same thing ? My system: Vga:VGA compatible controller: nVidia Corporation G86 [GeForce 8400 GS] (rev a1)

4 6

[arch-general] Strange Xorg issue - no init of NV 8800GT - reboot -> late init?
by David C. Rankin 25 Oct '10

25 Oct '10

Guys, I don't know if this is software or hardware related, but after a shutdown (power outage that exhausted the UPS), I boot my box and I get no display at all. The nvidia platinum SLI board has an onboard vga controller that is turned off in the bios and the box uses an nv8800gt for the display. After ssh'ing into the box I looked at the pci bus with lspci: <snip> 02:00.0 VGA compatible controller: nVidia Corporation C77 [nForce 750a SLI] (rev a2) 05:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 05:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) There was no 8800gt shown and the vga controller was shown as a nForce 750a SLI (huh?). Also, the timestamp looks huge (maybe fsck ran?) Checking the Xorg.0.log showed the 'No display devices found' error: [ 1795.823] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 1795.823] (==) NVIDIA(0): RGB weight 888 [ 1795.823] (==) NVIDIA(0): Default visual is TrueColor [ 1795.823] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 1795.823] (**) NVIDIA(0): Option "Coolbits" "1" [ 1795.823] (**) NVIDIA(0): Enabling RENDER acceleration [ 1795.823] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is [ 1795.823] (II) NVIDIA(0): enabled. [ 1795.977] (II) NVIDIA(0): NVIDIA GPU nForce 750a SLI (C77) at PCI:2:0:0 (GPU-0) [ 1795.978] (--) NVIDIA(0): Memory: 524288 kBytes [ 1795.978] (--) NVIDIA(0): VideoBIOS: 62.77.2f.00.05 [ 1795.978] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 1795.978] (--) NVIDIA(0): Connected display device(s) on nForce 750a SLI at PCI:2:0:0 [ 1795.978] (--) NVIDIA(0): none [ 1795.979] (EE) NVIDIA(0): No display devices found for this X screen. [ 1796.111] (II) UnloadModule: "nvidia" [ 1796.111] (II) UnloadModule: "wfb" [ 1796.111] (II) UnloadModule: "fb" [ 1796.111] (EE) Screen(s) found, but none have a usable configuration. [ 1796.111] Fatal server error: [ 1796.111] no screens found [ 1796.111] Please consult the The X.Org Foundation support at http://wiki.x.org for help. After shutdown (power-off) and reboot, there was no bios screen and no boot loader display, but then after kdm init, the display appeared. Checking with lspci, the 8800GT magically appeared: <snip> 02:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GT] (rev a2) 04:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 04:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) Checking the Xorg.0.log after the display was up. all looks OK: <snip> [ 23.539] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:2:0:0 (GPU-0) [ 23.539] (--) NVIDIA(0): Memory: 524288 kBytes [ 23.539] (--) NVIDIA(0): VideoBIOS: 62.92.24.00.01 [ 23.539] (II) NVIDIA(0): Detected PCI Express Link width: 8X [ 23.539] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 23.539] (--) NVIDIA(0): Connected display device(s) on GeForce 8800 GT at PCI:2:0:0 [ 23.539] (--) NVIDIA(0): Acer V223W (DFP-0) [ 23.539] (--) NVIDIA(0): Acer V223W (DFP-0): 330.0 MHz maximum pixel clock [ 23.539] (--) NVIDIA(0): Acer V223W (DFP-0): Internal Dual Link TMDS [ 23.698] (II) NVIDIA(0): Assigned Display Device: DFP-0 [ 23.698] (==) NVIDIA(0): [ 23.698] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 23.698] (==) NVIDIA(0): will be used as the requested mode. What I don't know is whether this can be kernel/new xorg related or whether this looks more like a hardware issue? Given the lack of bios/grub display, it sounds like it was still looking at the wrong controller until kdm start. I don't see how the system could change its mind mid-stream and fix itself, but the display/card is working fine now. Anybody have any thoughts on this? -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

2 2

[arch-general] Question about installing libraries
by Christian 25 Oct '10

25 Oct '10

Hi all, I am learning and learning more in Arch linux, but I have a question. There are a few programs that I use and I am not able to find all the dependencies in the Arch repositories, and some of th elibraries are a little old and the developers have .deb packages for them. So my question is if I get a such package, may I just extract it, unpack the data.tar.gz and copy the libraries into /usr/lib? For example, I now need to use pygame1.8 and there is 1.9 in the arch repository. What do you think? Many thanks, Christian

5 8

[arch-general] Kirill Churin wants to stay in touch on LinkedIn
by Kirill Churin 25 Oct '10

25 Oct '10

LinkedIn ------------ General, I'd like to add you to my professional network on LinkedIn. - Kirill Churin Kirill Churin Independent Information Technology and Services Professional Russian Federation Confirm that you know Kirill Churin https://www.linkedin.com/e/j2jirp-gfoo3eku-30/isd/1819051422/B-ZHSOlx/ -- (c) 2010, LinkedIn Corporation

3 3

[arch-general] How to do this
by Christian 24 Oct '10

24 Oct '10

Hi all, I know that I have to use piping for this, but I want to output the errors I get while compiling a program into atext file. What to type after make then? Many thanks for any help, Christian

7 9

[arch-general] devtools:mkarchroot fails under sudo
by Baho Utot 24 Oct '10

24 Oct '10

Following Building in a clean chroot I have encountered the following issue, which is related to using sudo mkarchroot The full path is not included (code posted from mkarchroot) should this be fixed? After patching mkarchroot it works with sudo. BUILD=/home/devtools $ sudo mkdir -vp ${BUILD} mkdir: created directory `/home/devtools' $ sudo /usr/sbin/mkarchroot "${BUILD}/root" base base-devel sudo :: Synchronizing package databases... .... [putolin] .... /usr/sbin/mkarchroot: line 178: ldconfig: command not found /usr/sbin/mkarchroot: line 191: chroot: command not found /usr/sbin/mkarchroot line 178: if [ -d "${working_dir}/lib/modules" ]; then ldconfig -r "${working_dir}" fi if [ -d "${working_dir}/lib/modules" ]; then /sbin/ldconfig -r "${working_dir}" fi line 191: if [ -e "${working_dir}/etc/locale.gen" ]; then echo -e 'en_US.UTF-8 UTF-8\nde_DE.UTF-8 UTF-8' > "${working_dir}/etc/locale.gen" chroot "${working_dir}" locale-gen if [ -e "${working_dir}/etc/locale.gen" ]; then echo -e 'en_US.UTF-8 UTF-8\nde_DE.UTF-8 UTF-8' > "${working_dir}/etc/locale.gen" /usr/sbin/chroot "${working_dir}" /usr/sbin/locale-gen

1 0