- Arch-general - lists.archlinux.org

[arch-general] udev rules 2 times exec script
by Maykel Franco 13 Jun '21

13 Jun '21

Hi, I try configure the rule in udev for when I connect specific usb device, launch script backup. I have this rule: /etc/udev/rules.d/10.autobackup.rules SUBSYSTEM=="block", ACTION=="add", ATTRS{idVendor}=="058f", ATTRS{idProduct}=="6387", SYMLINK+="external%n", RUN+="/usr/local/bin/autobackup.sh" This works well, buth exec 2 times the script... Jun 12 13:53:09 archlaptop autobackup.sh: BEGIN SCRIPT Jun 12 13:53:13 archlaptop autobackup.sh: BEGIN SCRIPT I googled and I see this: The issue was resolved by adding ENV{DEVTYPE}=="usb_device" in a rule. If add ENV{DEVTYPE}=="usb_device" and change the SUBSYSTEM=="usb_device" , when plug usb, udev does nothing ... I don't understand why udevadm info -a -p $(udevadm info -q path -n /dev/sda1) https://pastebin.com/Zcz769BQ

4 4

[arch-general] Firefox dropping support for OTB fonts as well?
by Javier 10 Jun '21

10 Jun '21

Hello ! After pango moved to use Harfbuzz, the Terminus bitmap fonts no longer were shown as a font on could select on firefox, so Terminus bitmap fonts were actually dropped. Then later kept showing up on Firefox as they used to, like xos4 Terminus, but I don't know if they kept working as before... At that time though, Terminus OTB (openTypeBitmap) were still showing up as an option on Firefox, as just Terminus, and were working fine. Even until versions 88+. With Firefox 89, the Terminus OTB and the Terminus bitmap fonts can be selected still, but they don't really work anymore. When one zooms out or zooms in a web site, the mono space fonts using whether Terminus or xos4 Terminus do NOT zoom at all, they remain the same pretty small size. And manually changing the monospace (which are the ones I set with terminus fonts) size through preferences don't make the fonts change size at all. So it seems neither bitmap, nor OTP, Terminus fonts are working on Firefox any more. On AUR there's a terminus-font-ttf, meant for Java applications it seems, which are apparently working on Firefox. I tried them before on virtual terminals like rxvt-unicode and qterminal, and they look pretty bad (blurry actually), so I wouldn't dare using those fonts on any virtual terminal. However they seem to work on Firefox. Has Firefox finally dropped support for non TTF fonts? Are the TTF Terminus fonts, the definite work around? If someone knows, please provide some light, :) Thanks a lot ! -- Javier

3 5

[arch-general] USB Access of Nikon D3500 DSLR
by das 09 Jun '21

09 Jun '21

Dear Friends When I am connecting my machine to the camera with an USB-micro-USB cable, system is showing it all right with 'lsusb': ... Bus 001 Device 005: ID 04b0:0445 Nikon Corp. NIKON DSC D3500 ... The relevant part from 'usb-devices' too I am quoting here: ... T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b0 ProdID=0445 Rev=01.00 S: Manufacturer=NIKON S: Product=NIKON DSC D3500 S: SerialNumber=0000005508485 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none) ... Can you please help me? The filesystem is not showing anything, like it does with a thumb-drive or music-player. Do I to install some packages? Thank you in advance. dipankar das Kolkata, India

7 16

[arch-general] archlinux.org/pacman/pacman.conf.5.html from Aug-2019
by u34＠net9.ga 08 Jun '21

08 Jun '21

The time stamp at the bottom of https://archlinux.org/pacman/pacman.conf.5.html is Aug-2019. The way I understand pacman v6 conf, there are some changes. Such as retiring TotalDownload. I haven't checked if there are differences with other files at the site. Is updating pacman.conf.5.html already scheduled? -- u34

18 35

[arch-general] Problems updating wine 6.9-1 -> 6.10-1
by Uwe Sauter 07 Jun '21

07 Jun '21

Hi all, I'm hitting update problems with wine. Seems like uninstalling 6.9-1 and installing 6.10-1 or advanced usage of "pacman -Su --overwrite <glob>" is needed. Pacman shows 4253 conflicting files in a lot of directories. Regards, Uwe :: Starting full system upgrade... resolving dependencies... looking for conflicting packages... Packages (26) alsa-lib-1.2.5-2 alsa-plugins-1:1.2.5-2 alsa-topology-conf-1.2.5-1 alsa-ucm-conf-1.2.5-1 alsa-utils-1.2.5-2 at-spi2-core-2.40.2-1 colord-1.4.5-4 gnome-desktop-1:40.1-2 gupnp-1.2.7-1 lib32-libogg-1.3.5-1 libcanberra-0.30+2+gc0620e4-4 libcanberra-pulse-0.30+2+gc0620e4-3 [removal] libcolord-1.4.5-4 libnice-0.1.18-2 libogg-1.3.5-1 libqmi-1.28.6-1 netctl-1.25-1 osinfo-db-20210531-1 pulseaudio-alsa-1:1.2.5-2 python-idna-3.2-1 python-wxpython-1:4.0.7.2-1 vte-common-0.64.2-2 vte3-0.64.2-2 zfs-linux-git-2021.06.04.r6925.ge5e76bd64_5.12.9.arch1.1-1 zfs-utils-git-2021.06.04.r6925.ge5e76bd64-1 wine-6.10-1 Total Installed Size: 616.35 MiB Net Upgrade Size: 430.96 MiB checking keyring... checking package integrity... loading package files... checking for file conflicts... wine: /usr/bin/function_grep.pl exists in filesystem wine: /usr/bin/msidb exists in filesystem wine: /usr/bin/msiexec exists in filesystem wine: /usr/bin/notepad exists in filesystem wine: /usr/bin/regedit exists in filesystem wine: /usr/bin/regsvr32 exists in filesystem wine: /usr/bin/widl exists in filesystem wine: /usr/bin/wine exists in filesystem wine: /usr/bin/wine-preloader exists in filesystem wine: /usr/bin/wine64 exists in filesystem wine: /usr/bin/wine64-preloader exists in filesystem wine: /usr/bin/wineboot exists in filesystem wine: /usr/bin/winebuild exists in filesystem wine: /usr/bin/winecfg exists in filesystem wine: /usr/bin/wineconsole exists in filesystem wine: /usr/bin/winecpp exists in filesystem wine: /usr/bin/winedbg exists in filesystem wine: /usr/bin/winedump exists in filesystem wine: /usr/bin/winefile exists in filesystem wine: /usr/bin/wineg++ exists in filesystem wine: /usr/bin/winegcc exists in filesystem wine: /usr/bin/winemaker exists in filesystem wine: /usr/bin/winemine exists in filesystem wine: /usr/bin/winepath exists in filesystem wine: /usr/bin/wineserver exists in filesystem wine: /usr/bin/wmc exists in filesystem wine: /usr/bin/wrc exists in filesystem wine: /usr/include/wine/debug.h exists in filesystem wine: /usr/include/wine/exception.h exists in filesystem wine: /usr/include/wine/itss.h exists in filesystem wine: /usr/include/wine/itss.idl exists in filesystem wine: /usr/include/wine/msvcrt/assert.h exists in filesystem wine: /usr/include/wine/msvcrt/complex.h exists in filesystem wine: /usr/include/wine/msvcrt/conio.h exists in filesystem wine: /usr/include/wine/msvcrt/corecrt.h exists in filesystem wine: /usr/include/wine/msvcrt/corecrt_io.h exists in filesystem […] wine: /usr/share/wine/nls/c_950.nls exists in filesystem wine: /usr/share/wine/nls/l_intl.nls exists in filesystem wine: /usr/share/wine/nls/normidna.nls exists in filesystem wine: /usr/share/wine/nls/normnfc.nls exists in filesystem wine: /usr/share/wine/nls/normnfd.nls exists in filesystem wine: /usr/share/wine/nls/normnfkc.nls exists in filesystem wine: /usr/share/wine/nls/normnfkd.nls exists in filesystem wine: /usr/share/wine/nls/sortdefault.nls exists in filesystem wine: /usr/share/wine/wine.inf exists in filesystem Errors occurred, no packages were upgraded.

2 2

[arch-general] System Freeze on sleep
by Prateek Sadhukhan 01 Jun '21

01 Jun '21

Hello All, After upgrading to the new kernel I see that my system freezes when I try to resume from sleep. This happens intermittently but frequent enough to be irritating. I have to reboot the system to recover. I am running kernel 5.12.7-arch1-1 The issue was not seen with kernel 5.11. I am running arch on btrfs and I suspect it is a btrfs issue somehow. When I check dmesg (journactl --dmesg --boot -1) I see that it always ends with the following two lines when the issue is seen. May 29 07:12:40 matrix kernel: PM: suspend entry (deep) May 29 07:12:40 matrix kernel: Filesystems sync: 0.025 seconds I wanted to know how do I attempt to debug this issue? Regards, Prateek

6 14

[arch-general] blk_update_request: I/O error, dev sda
by Morten Bo Johansen 31 May '21

31 May '21

Hi Arch is occasionally - only occasionally - very slow to start up. After examining the dmesg log, I see errors like 100.740566] blk_update_request: I/O error, dev sda, sector 119400712 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0 [ 100.740584] ata1: EH complete [ 101.100769] audit: type=1130 audit(1622446429.249:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" ex e="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 101.180724] ata1.00: exception Emask 0x0 SAct 0x40 SErr 0x0 action 0x6 [ 101.180730] ata1.00: irq_stat 0x40000008 [ 101.180733] ata1.00: failed command: READ FPDMA QUEUED [ 101.180735] ata1.00: cmd 60/70:30:f8:37:1e/00:00:07:00:00/40 tag 6 ncq dma 57344 in res 41/84:70:fc:37:1e/00:00:07:00:00/00 Emask 0x410 (ATA bus error) <F> [ 101.180742] ata1.00: status: { DRDY ERR } [ 101.180743] ata1.00: error: { ICRC ABRT } [ 101.180747] ata1: hard resetting link [ 101.488857] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 101.594776] ata1.00: configured for UDMA/66 [ 101.594806] sd 0:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s [ 101.594811] sd 0:0:0:0: [sda] tag#6 Sense Key : Aborted Command [current] [ 101.594816] sd 0:0:0:0: [sda] tag#6 Add. Sense: Scsi parity error [ 101.594819] sd 0:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 07 1e 37 f8 00 00 70 00 [ 101.594821] blk_update_request: I/O error, dev sda, sector 119420920 op 0x0:(READ) flags 0x80700 phys_seg 10 prio class 0 [ 101.594844] ata1: EH complete [ 101.870769] ata1.00: exception Emask 0x0 SAct 0x3c SErr 0x0 action 0x6 [ 101.870775] ata1.00: irq_stat 0x40000008 [ 101.870778] ata1.00: failed command: READ FPDMA QUEUED [ 101.870780] ata1.00: cmd 60/b8:18:c0:62:89/00:00:07:00:00/40 tag 3 ncq dma 94208 in res 41/84:b8:48:63:89/00:00:07:00:00/00 Emask 0x410 (ATA bus error) <F> [ 101.870787] ata1.00: status: { DRDY ERR } [ 101.870789] ata1.00: error: { ICRC ABRT } This suggests a hard drive that should be replaced, but badblocks reports that there are absolutely zero bad sectors or other errors on the hard drive. And the fact that the problem is intermittent also suggests that it may perhaps be a kernel issue rather than a hard drive issue? It is not a very critical machine and I have backups. Do you have some suggestions as to how I should go about dealing with this? Other commands to test the hard drive? Kernel parameters? Anything? ~/ % uname -a Linux gatsby 5.12.7-zen1-1-zen #1 ZEN SMP PREEMPT Wed, 26 May 2021 22:03:55 +0000 x86_64 GNU/Linux Thanks, Morten

4 10

[arch-general] How to enable Archlinux users to easily avoid Polkit?
by Neven Sajko 30 May '21

30 May '21

Hi On my up-to-date Archlinux system, the only package that depends on Polkit is Colord, which, in turn, is only depended on by GTK3. Forcefully removing the Polkit package (with pacman -R --assume-installed polkit polkit), works fine: after doing it, I rebooted and printed a page from Chromium (which uses GTK3 for this) on my black-and-white printer over USB. It would be very nice to give Arch and GTK3 users like me the opportunity to avoid Polkit without hassle. The only idea I got is to move polkit from depends to optdepends in the colord package, and add post_install and post_upgrade messages saying something like: > WARNING: install polkit if you plan on actually using colord! Do others agree that this would be more good than bad? In any case, I'm not a Pacman expert, so I'm hoping somebody can come up with an even better solution? Tangentially, what are the chances of convincing upstream to relax the Colord dependency on Polkit? Could such a patch get accepted? BTW, does somebody know what happened to the packages for building GTK3 without Colord, building Colord without Polkit, and similar? I think those were available on AUR previosuly. Regards, Neven

5 10

Re: [arch-general] [arch-dev-public] GCC 11 and new toolchain on [testing]
by Genes Lists 17 May '21

17 May '21

On 5/13/21 9:29 PM, Giancarlo Razzolini via arch-dev-public wrote: > Hi, > ... > > Also, if you guys notice any issues, let me know. > > Regards, > Giancarlo Razzolini Hi FYI, I've come across one issue which was triggered after updating to gcc 11. Building kea (from git) worked fine using gcc 10, I am now seeing fail : checking thread support... no configure: WARNING: unsupported C++11 feature configure: retrying by adding --std=c++1x to g++ --std=c++0x checking --std=c++1x support... no configure: error: thread (a C++11 feature) is not supported gene

2 5

[arch-general] How to say Arch
by Hritik Vijay 15 May '21

15 May '21

Hello I stumbled upon this really funny video (https://www.youtube.com/watch?v=nLdexZlVkAY) that goes to sing how to pronounce SUSE. Now, as Arch faces the same issue (being Ark Linux vs Arch linux), I was wondering if we could get some momentum towards building such content. :) Hrtk

5 5