- Arch-general - lists.archlinux.org

[arch-general] Spice issue with Arch (KDE) in QEMU/KVM
by Nick Gilmour 12 Oct '17

12 Oct '17

Hi all, I've just installed the latest Arch with KDE as a VM with QEMU/KVM in Virtual Media Manager. Everything seems to be working fine except spice, so the resolution and copy/paste do not work. The spice-vdagent and xf86-video-qxl are installed. There is not something wrong with my host configuration since I have already two other 2 VMs which work fine with spice. One with Fedora 26, which worked out of the box and one with Ubuntu 16.04.3 for which I had only to install spice-vdagent and now it also works fine. Any ideas what is going on? Regards, Nick

2 4

[arch-general] gnucash [aur]->[community]?
by Ido Rosen 11 Oct '17

11 Oct '17

Gnucash has 44 votes on AUR. It's useful (and very old, stable) accounting/bookkeeping software. Would any TUs be willing to migrate it from AUR to [community]? https://aur.archlinux.org/packages/gnucash/

6 6

[arch-general] firejail and network
by Shridhar Daithankar 11 Oct '17

11 Oct '17

Hello, For some time, chromium, firefox and qupzilla are unable to reach network/ internet/dns, if started from firejail. When started normally, all of these can reach the network as expected. So the internet link is not the problem. Has anybody experienced this? Any pointers to debug? Thanks. -- Regards Shridhar

4 6

[arch-general] Question regarding cmake
by Valo 10 Oct '17

10 Oct '17

Hello everybody, I noticed that extra/cmake depends on core or extra packages exception made for community/rhash. I was trying to use build.opensuse.org to build a package but was unable to use cmake due to the fact that it depends on a package in community which is not included in build.opensuse.org My question is: is it fine for an extra package to depend on a package found in community? I tried to search for policies but didn't find anything. It would be really helpful if rhash could be brought in extra or, if not strictly needed by cmake, to be made an optdep for it. I checked on debian.packages.org, they have 3.9.3-1 as the latest version of cmake which don't depend on rhash, I can't say anything for version 3.9.4 currently in extra. I'm saying it would be useful as cmake is used by many project ad being able to use it on opensuse build service would enable more packages to be built there for Arch. Thanks, -- sValo -- PGP ID 0x06DD1631 -- www.eigenlab.org -- www.exploitpisa.org -- "It must be inconvenient to be made of flesh," said the Scarecrow thoughtfully, "for you must sleep, and eat and drink. However, you have brains, and it is worth a lot of bother to be able to think properly." [The Wonderful Wizard of Oz] -- Please avoid sending me Word or PowerPoint attachments,it is a secret proprietary format, so it is hard for me to read. If you send me plain text, HTML, PDF, or ODF then I will read it without any problem. See http://www.gnu.org/philosophy/no-word-attachments.html Thanks

2 2

[arch-general] community/ipython package out-of-date
by Josiah Schwab 09 Oct '17

09 Oct '17

Hello, I noticed the Arch Linux ipython package is out of date, at v5.3. https://www.archlinux.org/packages/community/any/ipython/ It looks like it was first flagged almost 6 months ago when the 6.0 release hit. Since then, there have been multiple releases on both the 5.x and 6.x branches. The current versions are 6.2.1 & 5.5. https://github.com/ipython/ipython/releases I emailed the maintainer Kyle Keen two weeks ago, but have not received any response. Best, Josiah

1 0

[arch-general] IPSEC / L2PT for IOS
by siefke_listen＠web.de 09 Oct '17

09 Oct '17

Hello, have someone this setup working? Can it share? Or give howtos? I search since few hours but at end all what I found was with openswan. But it give only strongswan. I will be very happy. :) Thank you for help. Silvio

4 7

[arch-general] kernel bug in 4.13.3 related to wireless?
by Michał Zegan 08 Oct '17

08 Oct '17

Hello, For some time I am experiencing something like that: random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0 Linux version 4.13.3-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Sep 21 20:33:16 CEST 2017 Command line: initrd=/initramfs-linux.img ro root=LABEL=data resume=LABEL=swap intel_iommu=on x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000007079bfff] usable BIOS-e820: [mem 0x000000007079c000-0x000000007079cfff] ACPI NVS BIOS-e820: [mem 0x000000007079d000-0x00000000707c6fff] reserved BIOS-e820: [mem 0x00000000707c7000-0x0000000070878fff] usable BIOS-e820: [mem 0x0000000070879000-0x0000000071178fff] reserved BIOS-e820: [mem 0x0000000071179000-0x000000008738dfff] usable BIOS-e820: [mem 0x000000008738e000-0x0000000087d7dfff] reserved BIOS-e820: [mem 0x0000000087d7e000-0x0000000087f7dfff] ACPI NVS BIOS-e820: [mem 0x0000000087f7e000-0x0000000087ffdfff] ACPI data BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable BIOS-e820: [mem 0x0000000087fff000-0x00000000880fffff] reserved BIOS-e820: [mem 0x0000000088800000-0x000000008b7fffff] reserved BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x00000003737fffff] usable NX (Execute Disable) protection: active e820: update [mem 0x6e26a018-0x6e27a057] usable ==> usable e820: update [mem 0x6e26a018-0x6e27a057] usable ==> usable e820: update [mem 0x6e258018-0x6e269857] usable ==> usable e820: update [mem 0x6e258018-0x6e269857] usable ==> usable extended physical RAM map: reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved reserve setup_data: [mem 0x0000000000100000-0x000000006e258017] usable reserve setup_data: [mem 0x000000006e258018-0x000000006e269857] usable reserve setup_data: [mem 0x000000006e269858-0x000000006e26a017] usable reserve setup_data: [mem 0x000000006e26a018-0x000000006e27a057] usable reserve setup_data: [mem 0x000000006e27a058-0x000000007079bfff] usable reserve setup_data: [mem 0x000000007079c000-0x000000007079cfff] ACPI NVS reserve setup_data: [mem 0x000000007079d000-0x00000000707c6fff] reserved reserve setup_data: [mem 0x00000000707c7000-0x0000000070878fff] usable reserve setup_data: [mem 0x0000000070879000-0x0000000071178fff] reserved reserve setup_data: [mem 0x0000000071179000-0x000000008738dfff] usable reserve setup_data: [mem 0x000000008738e000-0x0000000087d7dfff] reserved reserve setup_data: [mem 0x0000000087d7e000-0x0000000087f7dfff] ACPI NVS reserve setup_data: [mem 0x0000000087f7e000-0x0000000087ffdfff] ACPI data reserve setup_data: [mem 0x0000000087ffe000-0x0000000087ffefff] usable reserve setup_data: [mem 0x0000000087fff000-0x00000000880fffff] reserved reserve setup_data: [mem 0x0000000088800000-0x000000008b7fffff] reserved reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved reserve setup_data: [mem 0x00000000ffa10000-0x00000000ffffffff] reserved reserve setup_data: [mem 0x0000000100000000-0x00000003737fffff] usable efi: EFI v2.40 by INSYDE Corp. efi: SMBIOS=0x87601000 ESRT=0x875ffe18 ACPI 2.0=0x87ffd014 PROP=0x6f468568 random: fast init done SMBIOS 2.8 present. DMI: LENOVO 80SM/Toronto 5A2, BIOS 0XCN36WW 08/30/2016 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x373800 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask 7C00000000 write-back 1 base 0087FFF000 mask 7FFFFFF000 uncachable 2 base 0088000000 mask 7FF8000000 uncachable 3 base 0090000000 mask 7FF0000000 uncachable 4 base 00A0000000 mask 7FE0000000 uncachable 5 base 00C0000000 mask 7FC0000000 uncachable 6 disabled 7 disabled 8 disabled 9 disabled x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT e820: update [mem 0x87fff000-0xffffffff] usable ==> reserved e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000 esrt: Reserving ESRT space from 0x00000000875ffe18 to 0x00000000875ffe78. Scanning 1 areas for low memory corruption Base memory trampoline at [ffff8f4500080000] 80000 size 24576 Using GB pages for direct mapping BRK [0x1bd5e000, 0x1bd5efff] PGTABLE BRK [0x1bd5f000, 0x1bd5ffff] PGTABLE BRK [0x1bd60000, 0x1bd60fff] PGTABLE BRK [0x1bd61000, 0x1bd61fff] PGTABLE BRK [0x1bd62000, 0x1bd62fff] PGTABLE BRK [0x1bd63000, 0x1bd63fff] PGTABLE BRK [0x1bd64000, 0x1bd64fff] PGTABLE BRK [0x1bd65000, 0x1bd65fff] PGTABLE BRK [0x1bd66000, 0x1bd66fff] PGTABLE BRK [0x1bd67000, 0x1bd67fff] PGTABLE Secure boot disabled RAMDISK: [mem 0x7f304000-0x7fffefff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x0000000087FFD014 000024 (v02 LENOVO) ACPI: XSDT 0x0000000087FC9188 0000F4 (v01 LENOVO CB-01 00000001 01000013) ACPI: FACP 0x0000000087FEB000 0000F4 (v05 LENOVO CB-01 00000001 ACPI 00040000) ACPI: DSDT 0x0000000087FCE000 01833A (v02 LENOVO CB-01 00000001 ACPI 00040000) ACPI: FACS 0x0000000087F4E000 000040 ACPI: TCPA 0x0000000087FFC000 000032 (v02 LENOVO CB-01 00000001 ACPI 00040000) ACPI: UEFI 0x0000000087FFB000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: UEFI 0x0000000087FFA000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0x0000000087FF9000 0004B7 (v02 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0x0000000087FF8000 00004B (v02 LENOVO CB-01 00000001 ACPI 00040000) ACPI: TPM2 0x0000000087FF7000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000) ACPI: POAT 0x0000000087FF6000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0x0000000087FF2000 0030D3 (v02 LENOVO CB-01 00000001 ACPI 00040000) ACPI: DBGP 0x0000000087FF1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: DBG2 0x0000000087FF0000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000) ACPI: ASF! 0x0000000087FEF000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) ACPI: ASPT 0x0000000087FEE000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) ACPI: BOOT 0x0000000087FED000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: DBGP 0x0000000087FEC000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: HPET 0x0000000087FEA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: LPIT 0x0000000087FE9000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: APIC 0x0000000087FE8000 0000BC (v03 LENOVO CB-01 00000001 ACPI 00040000) ACPI: MCFG 0x0000000087FE7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0x0000000087FCD000 0002D4 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0x0000000087FCA000 002BAE (v02 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0x0000000087FC8000 000B49 (v02 LENOVO CB-01 00000001 ACPI 00040000) ACPI: SSDT 0x0000000087FC7000 000E73 (v02 LENOVO CB-01 00000001 ACPI 00040000) ACPI: DMAR 0x0000000087FC6000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: FPDT 0x0000000087FC5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: BGRT 0x0000000087FC4000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at [mem 0x0000000000000000-0x00000003737fffff] NODE_DATA(0) allocated [mem 0x3737f9000-0x3737fdfff] Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x00000003737fffff] Device empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x0000000000085fff] node 0: [mem 0x0000000000100000-0x000000007079bfff] node 0: [mem 0x00000000707c7000-0x0000000070878fff] node 0: [mem 0x0000000071179000-0x000000008738dfff] node 0: [mem 0x0000000087ffe000-0x0000000087ffefff] node 0: [mem 0x0000000100000000-0x00000003737fffff] Initmem setup node 0 [mem 0x0000000000001000-0x00000003737fffff] On node 0 totalpages: 3121640 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3972 pages, LIFO batch:0 DMA32 zone: 8554 pages used for memmap DMA32 zone: 547428 pages, LIFO batch:31 Normal zone: 40160 pages used for memmap Normal zone: 2570240 pages, LIFO batch:31 Reserving Intel graphics memory at 0x0000000089800000-0x000000008b7fffff ACPI: PM-Timer IO Port: 0x1808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later) smpboot: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: Registered nosave memory: [mem 0x00086000-0x000fffff] PM: Registered nosave memory: [mem 0x6e258000-0x6e258fff] PM: Registered nosave memory: [mem 0x6e269000-0x6e269fff] PM: Registered nosave memory: [mem 0x6e26a000-0x6e26afff] PM: Registered nosave memory: [mem 0x6e27a000-0x6e27afff] PM: Registered nosave memory: [mem 0x7079c000-0x7079cfff] PM: Registered nosave memory: [mem 0x7079d000-0x707c6fff] PM: Registered nosave memory: [mem 0x70879000-0x71178fff] PM: Registered nosave memory: [mem 0x8738e000-0x87d7dfff] PM: Registered nosave memory: [mem 0x87d7e000-0x87f7dfff] PM: Registered nosave memory: [mem 0x87f7e000-0x87ffdfff] PM: Registered nosave memory: [mem 0x87fff000-0x880fffff] PM: Registered nosave memory: [mem 0x88100000-0x887fffff] PM: Registered nosave memory: [mem 0x88800000-0x8b7fffff] PM: Registered nosave memory: [mem 0x8b800000-0xdfffffff] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: Registered nosave memory: [mem 0xfee01000-0xffa0ffff] PM: Registered nosave memory: [mem 0xffa10000-0xffffffff] e820: [mem 0x8b800000-0xdfffffff] available for PCI devices Booting paravirtualized kernel on bare hardware clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 percpu: Embedded 36 pages/cpu @ffff8f4873400000 s106520 r8192 d32744 u524288 pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 3072841 Policy zone: Normal Kernel command line: initrd=/initramfs-linux.img ro root=LABEL=data resume=LABEL=swap intel_iommu=on DMAR: IOMMU enabled PID hash table entries: 4096 (order: 3, 32768 bytes) Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 12146300K/12486560K available (6603K kernel code, 1126K rwdata, 2036K rodata, 1328K init, 900K bss, 340260K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 ftrace: allocating 28108 entries in 110 pages Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4. Tasks RCU enabled. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16 Console: colour dummy device 80x25 console [tty0] enabled clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns hpet clockevent registered tsc: Detected 2400.000 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.00 BogoMIPS (lpj=8000000) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20170531 ACPI: 8 ACPI AML tables successfully acquired and loaded Security Framework initialized Yama: becoming mindful. Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 8 MCE banks CPU0: Thermal monitoring enabled (TM1) process: using mwait in idle threads Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 Freeing SMP alternatives memory: 24K smpboot: Max logical packages: 2 DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x00000087c7a000 end: 0x00000087c99fff DMAR: RMRR base: 0x00000089000000 end: 0x0000008b7fffff DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 DMAR-IR: HPET id 0 under DRHD base 0xfed91000 DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. DMAR-IR: Enabled IRQ remapping in xapic mode x2apic: IRQ remapping doesn't support X2APIC mode ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. ... version: 4 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Hierarchical SRCU implementation. NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 smp: Brought up 1 node, 4 CPUs smpboot: Total of 4 processors activated (19204.13 BogoMIPS) devtmpfs: initialized x86/mm: Memory block size: 128MB PM: Registering ACPI NVS region [mem 0x7079c000-0x7079cfff] (4096 bytes) PM: Registering ACPI NVS region [mem 0x87d7e000-0x87f7dfff] (2097152 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns futex hash table entries: 1024 (order: 4, 65536 bytes) pinctrl core: initialized pinctrl subsystem RTC time: 12:09:25, date: 09/30/17 NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu PCCT header not found. Simple Boot Flag at 0x44 set to 0x1 ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. PCI: Using configuration type 1 for base access HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Executed 17 blocks of module-level executable AML code ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8F486680F000 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20121220) ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8F486452CC00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121220) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8F48645AD240 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20121220) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8F486452BE00 000130 (v02 PmRef HwpLvt 00003000 INTL 20121220) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8F486680F800 0005AA (v02 PmRef ApIst 00003000 INTL 20121220) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8F486452A000 000119 (v02 PmRef ApHwp 00003000 INTL 20121220) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF8F486452A200 000119 (v02 PmRef ApCst 00003000 INTL 20121220) ACPI: EC: EC started ACPI: EC: interrupt blocked ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x4f, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0x8b800000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 pci 0000:00:14.0: reg 0x10: [mem 0xa1300000-0xa130ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 pci 0000:00:14.2: reg 0x10: [mem 0xa132a000-0xa132afff 64bit] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 pci 0000:00:16.0: reg 0x10: [mem 0xa132b000-0xa132bfff 64bit] pci 0000:00:16.0: PME# supported from D3hot pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 pci 0000:00:17.0: reg 0x10: [mem 0xa1328000-0xa1329fff] pci 0000:00:17.0: reg 0x14: [mem 0xa132e000-0xa132e0ff] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] pci 0000:00:17.0: reg 0x24: [mem 0xa132c000-0xa132c7ff] pci 0000:00:17.0: PME# supported from D3hot pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 pci 0000:00:1f.2: reg 0x10: [mem 0xa1324000-0xa1327fff] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 pci 0000:00:1f.3: reg 0x10: [mem 0xa1320000-0xa1323fff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0xa1310000-0xa131ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 pci 0000:00:1f.4: reg 0x10: [mem 0xa132d000-0xa132d0ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] pci 0000:01:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit] pci 0000:01:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000 pci 0000:02:00.0: reg 0x10: [mem 0xa1000000-0xa11fffff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PCI bridge to [bus 02] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff] acpi MSFT0101:00: platform device creation failed: -16 ACPI: Enabled 5 GPEs in block 00 to 7F ACPI: EC: interrupt unblocked ACPI: EC: event unblocked ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x4f, EC_CMD/EC_SC=0x66, EC_DATA=0x62 ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:00:02.0: vgaarb: bridge control possible vgaarb: loaded EDAC MC: Ver: 3.0.0 Registered efivars operations PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] e820: reserve RAM buffer [mem 0x6e258018-0x6fffffff] e820: reserve RAM buffer [mem 0x6e26a018-0x6fffffff] e820: reserve RAM buffer [mem 0x7079c000-0x73ffffff] e820: reserve RAM buffer [mem 0x70879000-0x73ffffff] e820: reserve RAM buffer [mem 0x8738e000-0x87ffffff] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff] e820: reserve RAM buffer [mem 0x373800000-0x373ffffff] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 24.000000 MHz counter clocksource: Switched to clocksource hpet VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) pnp: PnP ACPI init system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:01: [io 0x2000-0x20fe] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:02: [io 0x0680-0x069f] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0xffff] has been reserved system 00:02: [io 0x1800-0x18fe] has been reserved system 00:02: [io 0x164e-0x164f] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) system 00:04: [io 0x1854-0x1857] has been reserved system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:06: Plug and Play ACPI device, IDs SYN2b59 PNP0f13 SYN0002 SYN2b00 (active) system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved system 00:08: [mem 0xe0000000-0xefffffff] has been reserved system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved system 00:08: [mem 0xff000000-0xffffffff] could not be reserved system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:08: [mem 0x8b800000-0x8b81ffff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 9 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xa1200000-0xa12fffff] pci 0000:00:1c.5: PCI bridge to [bus 02] pci 0000:00:1c.5: bridge window [mem 0xa1000000-0xa11fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: resource 15 [mem 0x8b800000-0xdfffffff window] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff] pci_bus 0000:02: resource 1 [mem 0xa1000000-0xa11fffff] NET: Registered protocol family 2 TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) UDP hash table entries: 8192 (order: 6, 262144 bytes) UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 13292K DMAR: No ATSR found DMAR: dmar0: Using Queued invalidation DMAR: dmar1: Using Queued invalidation DMAR: Setting RMRR: DMAR: Setting identity map for device 0000:00:02.0 [0x89000000 - 0x8b7fffff] DMAR: Setting identity map for device 0000:00:14.0 [0x87c7a000 - 0x87c99fff] DMAR: Prepare 0-16MiB unity mapping for LPC DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] DMAR: Intel(R) Virtualization Technology for Directed I/O iommu: Adding device 0000:00:00.0 to group 0 iommu: Adding device 0000:00:02.0 to group 1 iommu: Adding device 0000:00:14.0 to group 2 iommu: Adding device 0000:00:14.2 to group 2 iommu: Adding device 0000:00:16.0 to group 3 iommu: Adding device 0000:00:17.0 to group 4 iommu: Adding device 0000:00:1c.0 to group 5 iommu: Adding device 0000:00:1c.5 to group 5 iommu: Adding device 0000:00:1f.0 to group 6 iommu: Adding device 0000:00:1f.2 to group 6 iommu: Adding device 0000:00:1f.3 to group 6 iommu: Adding device 0000:00:1f.4 to group 6 iommu: Adding device 0000:01:00.0 to group 5 iommu: Adding device 0000:02:00.0 to group 5 clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns Scanning for low memory corruption every 60 seconds Initialise system trusted keyrings Key type blacklist registered workingset: timestamp_bits=40 max_order=22 bucket_order=0 zbud: loaded Key type asymmetric registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered io scheduler bfq registered pcieport 0000:00:1c.0: Signaling PME with IRQ 122 pcieport 0000:00:1c.5: Signaling PME with IRQ 123 efifb: probing for efifb efifb: framebuffer at 0x90000000, using 4128k, total 4128k efifb: mode is 1366x768x32, linelength=5504, pages=1 efifb: scrolling: redraw efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 170x48 fb0: EFI VGA frame buffer device intel_idle: MWAIT substates: 0x11142120 intel_idle: v0.4.1 model 0x4E intel_idle: lapic_timer_reliable_states 0xffffffff GHES: HEST is not enabled! Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Linux agpgart interface v0.103 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs intel_pstate: Intel P-state driver initializing intel_pstate: HWP enabled ledtrig-cpu: registered to indicate activity on CPUs vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized NET: Registered protocol family 10 Segment Routing with IPv6 NET: Registered protocol family 17 RAS: Correctable Errors collector initialized. microcode: sig=0x406e3, pf=0x80, revision=0x84 microcode: Microcode Update Driver: v2.2. sched_clock: Marking stable (861091992, 0)->(965257119, -104165127) registered taskstats version 1 Loading compiled-in X.509 certificates zswap: loaded using pool lzo/zbud Magic number: 1:163:179 acpi device:0f: hash matches rtc_cmos 00:03: setting system clock to 2017-09-30 12:09:25 UTC (1506773365) PM: Checking hibernation image partition LABEL=swap PM: Hibernation image not present or could not be loaded. Freeing unused kernel memory: 1328K Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1576K Freeing unused kernel memory: 12K i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 SCSI subsystem initialized usbcore: registered new device driver usb libata version 3.00 loaded. xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 xhci_hcd 0000:00:14.0: cache line size of 64 is not supported hub 1-0:1.0: USB hub found hub 1-0:1.0: 12 ports detected xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb: port power management may be unreliable ahci 0000:00:17.0: version 3.0 ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst scsi host0: ahci scsi host1: ahci ata1: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c100 irq 125 ata2: SATA max UDMA/133 abar m2048@0xa132c000 port 0xa132c180 irq 125 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-9: WDC WD10JPCX-24UE4T0, 01.01A01, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD10JPCX-24U 1A01 PQ: 0 ANSI: 5 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GUE0N T.02 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA usb 1-4: new high-speed USB device number 2 using xhci_hcd sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel(a)redhat.com usb 1-5: new high-speed USB device number 3 using xhci_hcd clocksource: Switched to clocksource tsc usbcore: registered new interface driver rtsx_usb raid6: sse2x1 gen() 7026 MB/s usb 1-7: new full-speed USB device number 4 using xhci_hcd raid6: sse2x1 xor() 7497 MB/s raid6: sse2x2 gen() 12594 MB/s raid6: sse2x2 xor() 8545 MB/s raid6: sse2x4 gen() 13218 MB/s raid6: sse2x4 xor() 9011 MB/s raid6: avx2x1 gen() 20238 MB/s raid6: avx2x1 xor() 14069 MB/s raid6: avx2x2 gen() 24882 MB/s raid6: avx2x2 xor() 15576 MB/s raid6: avx2x4 gen() 26442 MB/s raid6: avx2x4 xor() 17467 MB/s raid6: using algorithm avx2x4 gen() 26442 MB/s raid6: .... xor() 17467 MB/s, rmw enabled raid6: using avx2x2 recovery algorithm xor: automatically using best checksumming function avx Btrfs loaded, crc32c=crc32c-intel BTRFS: device label data devid 1 transid 195472 /dev/dm-1 PM: Starting manual resume from disk PM: Hibernation image partition 254:0 present PM: Looking for hibernation image. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. BTRFS info (device dm-1): disk space caching is enabled BTRFS info (device dm-1): has skinny extents random: crng init done ip_tables: (C) 2000-2006 Netfilter Core Team systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) Detected architecture x86-64. Set hostname to <wlap>. Reached target Remote File Systems. Listening on LVM2 metadata daemon socket. Started Forward Password Requests to Wall Directory Watch. Listening on Device-mapper event daemon FIFOs. Listening on udev Kernel Socket. Listening on udev Control Socket. Listening on Process Core Dump Socket. BTRFS info (device dm-1): disk space caching is enabled sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 speakup: module is from the staging directory, the quality is unknown, you have been warned. input: Speakup as /devices/virtual/input/input2 initialized device: /dev/synth, node (MAJOR 10, MINOR 25) speakup 3.1.6: initialized synth name on entry is: (null) speakup_soft: module is from the staging directory, the quality is unknown, you have been warned. synth probe initialized device: /dev/softsynth, node (MAJOR 10, MINOR 26) initialized device: /dev/softsynthu, node (MAJOR 10, MINOR 27) ACPI: AC Adapter [ADP0] (on-line) (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). i801_smbus 0000:00:1f.4: SPD Write Disable is set i801_smbus 0000:00:1f.4: SMBus using PCI interrupt shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 mei_me 0000:00:16.0: enabling device (0000 -> 0002) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 ACPI: Power Button [PWRF] ACPI: Battery Slot [BAT0] (battery present) r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffff9b3ec1a75000, c8:5b:76:5f:36:3e, XID 10900800 IRQ 127 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] hidraw: raw HID events driver (C) Jiri Kosina Bluetooth: Core ver 2.22 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized input: PC Speaker as /devices/platform/pcspkr/input/input7 [drm] Memory usable by graphics device = 4096M [drm] VT-d active for gfx access checking generic (90000000 408000) vs hw (90000000 10000000) fb: switching to inteldrmfb from EFI VGA Console: switching to colour dummy device 80x25 [drm] Replacing VGA console driver [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 fbcon: inteldrmfb (fb0) is primary device usbcore: registered new interface driver btusb Bluetooth: HCI UART driver ver 2.3 Bluetooth: HCI UART protocol H4 registered Bluetooth: HCI UART protocol BCSP registered Bluetooth: HCI UART protocol LL registered Bluetooth: HCI UART protocol ATH3K registered Bluetooth: HCI UART protocol Three-wire (H5) registered Bluetooth: HCI UART protocol Intel registered Bluetooth: HCI UART protocol Broadcom registered Bluetooth: HCI UART protocol QCA registered Bluetooth: HCI UART protocol AG6XX registered Bluetooth: HCI UART protocol Marvell registered RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules RAPL PMU: hw unit of domain psys 2^-14 Joules [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26) input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input9 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) AVX2 version of gcm_enc/dec engaged. AES CTR mode by8 optimization enabled psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4794] psmouse serio1: synaptics: queried min coordinates: x [1314..], y [1098..] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00323/0x840300/0x2a800/0x0, board id: 2848, fw id: 1960267 [drm] RC6 on media: Linux media interface: v0.10 Linux video capture interface: v2.00 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 r8169 0000:01:00.0 enp1s0: renamed from eth0 ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 Console: switching to colour frame buffer device 170x48 snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) i915 0000:00:02.0: fb0: inteldrmfb frame buffer device snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing. snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_conexant hdaudioC0D0: inputs: snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication mousedev: PS/2 mouse device common for all mice uvcvideo: Found UVC 1.00 device EasyCamera (0bda:57f9) uvcvideo 1-4:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized! uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized! uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized! uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized! input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 ath10k_pci 0000:02:00.0: qca9377 hw1.0 target 0x05020000 chip_id 0x003820ff sub 17aa:4035 ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0 ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7 intel_rapl: Found RAPL domain package intel_rapl: Found RAPL domain core intel_rapl: Found RAPL domain uncore intel_rapl: Found RAPL domain dram ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a Adding 14680060k swap on /dev/mapper/pool-swap. Priority:-1 extents:1 across:14680060k FS ath10k_pci 0000:02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 ath: EEPROM regdomain: 0x6c ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x6c ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready r8169 0000:01:00.0 enp1s0: link down IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. IPv6: ADDRCONF(NETDEV_UP): bridge: link is not ready IPv6: ADDRCONF(NETDEV_UP): bridge: link is not ready IPv6: ADDRCONF(NETDEV_UP): bridge: link is not ready IPv6: ADDRCONF(NETDEV_UP): bridge: link is not ready nf_conntrack version 0.5.0 (65536 buckets, 262144 max) IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready ath10k_pci 0000:02:00.0: no channel configured; ignoring frame(s)! Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready ath10k_pci 0000:02:00.0: no channel configured; ignoring frame(s)! wlp2s0: authenticate with 18:a6:f7:fc:65:20 wlp2s0: send auth to 18:a6:f7:fc:65:20 (try 1/3) wlp2s0: authenticated wlp2s0: associate with 18:a6:f7:fc:65:20 (try 1/3) wlp2s0: RX AssocResp from 18:a6:f7:fc:65:20 (capab=0x431 status=0 aid=2) wlp2s0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready fuse init (API version 7.26) INFO: task kworker/u8:2:109 blocked for more than 120 seconds. Tainted: G C 4.13.3-1-ARCH #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u8:2 D 0 109 2 0x00000000 Workqueue: phy0 ieee80211_ba_session_work [mac80211] Call Trace: __schedule+0x239/0x890 schedule+0x3d/0x90 schedule_preempt_disabled+0x15/0x20 __mutex_lock.isra.2+0x295/0x520 ? __update_load_avg_se.isra.37+0x155/0x160 __mutex_lock_slowpath+0x13/0x20 ? __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x25/0x30 __ieee80211_start_rx_ba_session+0x153/0x520 [mac80211] ? dequeue_entity+0xed/0x4d0 ieee80211_ba_session_work+0x164/0x250 [mac80211] process_one_work+0x1de/0x430 worker_thread+0x47/0x3f0 kthread+0x125/0x140 ? process_one_work+0x430/0x430 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x25/0x30 This thing always happens after booting the system, few minutes after boot. Seems to be a kind of wireless related regression, has anyone experienced that? Maybe any fix is known, or the bug reported?

7 13

[arch-general] asp checkout issue
by Ralf Mardorf 08 Oct '17

08 Oct '17

Hi, it became impossible to use Evolution's search folders. If software is buggy I usually report it to upstream, seldom to the Arch bug tracker. This is always done with a description of the issue and if possible, how to reproduce it. This month I'm very short in time, so after making the below investigation [1], I've got no time to describe the problem any further, let alone to report the issue to a bug tracker. Take a look at https://bugs.archlinux.org/task/53840 , since this is the reason for the investigation. However, seemingly I found another bug or at least a sync issue for asp. [rocketmouse@archlinux ~]$ pacman -Q asp asp 2-1 [rocketmouse@archlinux ~]$ grep evolution /var/log/pacman.log | tail -4 [2017-10-07 07:37] [ALPM] upgraded evolution-data-server (3.24.5-1 -> 3.26.1-1) [2017-10-07 07:37] [ALPM] upgraded evolution (3.24.5-1 -> 3.26.1-1) [2017-10-07 07:37] [ALPM] upgraded evolution-bogofilter (3.24.5-1 -> 3.26.1-1) [2017-10-07 07:37] [ALPM] upgraded evolution-spamassassin (3.24.5-1 -> 3.26.1-1) The update was done nearly 1/4 day before I run asp checkout, so I expected that everything should be in sync. Regards, Ralf [1] [rocketmouse@archlinux ~]$ pkill -9 evolution [rocketmouse@archlinux ~]$ pacman -Q evolution{,-data-server,-bogofilter,-spamassassin} evolution 3.26.1-1 evolution-data-server 3.26.1-1 evolution-bogofilter 3.26.1-1 evolution-spamassassin 3.26.1-1 [rocketmouse@archlinux ~]$ cd /tmp/ [rocketmouse@archlinux tmp]$ asp checkout evolution [rocketmouse@archlinux tmp]$ grep _commit= evolution/trunk/PKGBUILD _commit=8acce30a4c862690b3e84107d598c61671acb54c # tags/EVOLUTION_3_24_5^0 "5 days ago EVOLUTION_3_26_1 Tag 3.26.1 release 0e2e5a8 zip tar.gz [snip] on Aug 7 EVOLUTION_3_24_5 8acce30 zip tar.gz" - https://github.com/GNOME/evolution/releases "Last Updated: 2017-10-06 12:08 UTC" - https://www.archlinux.org/packages/extra/x86_64/evolution/

2 3

Re: [arch-general] [arch-dev-public] systemd, kernel keyring and pam_keyinit
by Jordan Glover 06 Oct '17

06 Oct '17

As gdm/sddm include it's own pam_keynit module before sourcing system-login it'll be effectively called twice. Is this a problem? > -------- Original Message -------- > Subject: Re: [arch-dev-public] systemd, kernel keyring and pam_keyinit > Local Time: October 6, 2017 1:04 PM > UTC Time: October 6, 2017 1:04 PM > From: list(a)eworm.de > To: arch-dev-public(a)archlinux.org > > Christian Hesse <list(a)eworm.de> on Fri, 2017/09/29 16:30: >> Christian Hesse <list(a)eworm.de> on Mon, 2017/09/18 14:29: >> > Hello everybody, >> > >> > systemd v233 introduced code that makes use of the kernel keyring, >> > initializing a private keyring for every service and adding a protected >> > key named "invocation_id". This caused some trouble and we reverted it >> > since then. >> > >> > Things will change with systemd v235, which adds a new option >> > "KeyringMode=" for units. The values are "inherit", "private" and >> > "shared". The commit [0] message and changes give the details. Now >> > cryptsetup units are generated with "KeyringMode=shared", which unbreaks >> > this use case. Other services that use the kernel keyring and want to >> > share secrets with other services have to add this as well. >> > >> > However login sessions where user context is changed can not be handled by >> > systemd. Looks like we have to update our PAM configurations and add a >> > line for every service where session is expected to use the kernel >> > keyring: >> > >> > session optional pam_keyinit.so force revoke >> > >> > This is required for eCryptfs to function properly. >> > Any comments on this? Any concerns? >> > >> > I would like to keep the upstream keyring behavior with release version >> > 235. Would be nice to have this sorted before. >> > >> > [0] >> > https://github.com/systemd/systemd/commit/b1edf4456eabc5951d76b96bc7df2db3f… >> >> So we have a flyspray ticket requesting the same [1] and a report from >> Mantas who is already using a setup with pam_keyinit. >> >> As systemd upstream started preparing a release and milestone items are >> being resolved [2] I would like to see some progress. Who will do this? >> Dave, do you update pambase? Do we add a todo-list containing all packages >> with pam configuration files so maintainers can decide on their own whether >> or not this is feasible for the package? >> >> [1] https://bugs.archlinux.org/task/54915 >> [2] https://github.com/systemd/systemd/milestone/12 > > Pushed systemd 235.0-1 and pambase 20171006-1 to [testing]... > Let"s wait for people to complain. :-p > -- > main(a){char*c=/* Schoene Gruesse */"B?IJj;MEH" > "CX:;",b;for(a/* Best regards my address: */=0;b=c[a++];) > putchar(b-1/(/* Chris cc -ox -xc - && ./x */b/42*2-3)*42);}

1 0

[arch-general] linux-4.13: CONFIG_SPI removed?
by Christoph Gysin 05 Oct '17

05 Oct '17

I'm using a MacBookPro from late 2016, which features a keyboard and touchpad that are attached via SPI (spi_pxa2xx_platform), using the driver from [0]. It seems that with the upgrade to kernel 4.13. CONFIG_SPI has been removed [1]. Any idea what was the motivation behind this change? Was it intentional? I'm totally capable of compiling my own kernel, but I'd rather spend my time on other things :) Could we have CONFIG_SPI back in the stock kernel? [0] https://github.com/cb22/macbook12-spi-driver [1] https://git.archlinux.org/svntogit/packages.git/commit/trunk?h=packages/lin… -- echo mailto: NOSPAM !#$.'<*>'|sed 's. ..'|tr "<*> !#:2" org@fr33z3

2 1