- Arch-general - lists.archlinux.org

[arch-general] fish-style prompt for bash
by b4283 06 Sep '09

06 Sep '09

Hi, I just finished writing a fancier prompt for bash, which showing directories in an abbreviated form just like the fish shell does. function _prompt { _dir_abbr=$(temp=$(echo "${PWD/$HOME/~}" |sed -r 's/(\/.)[^/]*/\1/g'); echo ${temp:0:$(( ${#temp} - 1 ))}) _ps1="$(basename "${PWD/$HOME/~}")" if [ ${#_ps1} -gt 25 ]; then _ps1="${_ps1:0:7}...${_ps1: -7}" fi echo -n "$_dir_abbr$_ps1" } just quote the function in the $PS1 like this (e.g.): PS1='$(_prompt)] ' enjoy!

1 0

[arch-general] split packages documentation
by Damjan Georgievski 06 Sep '09

06 Sep '09

I've been looking for documentation about split packages in the usual places (man PKGBUILD, the wiki) but couldn't find any.. am I missing something or this is a feature-not-implemented? -- damjan

9 16

[arch-general] Conflict with Mesa
by Dario 05 Sep '09

05 Sep '09

Hi! Sorry if this has already been asked or if its solution is trivial. I got this conflict error from pacman -Syu: mesa: /usr/include/GL/glew.h è già presente nel filesystem mesa: /usr/include/GL/glxew.h è già presente nel filesystem mesa: /usr/include/GL/wglew.h è già presente nel filesystem è già presente nel filesystem = "already present in filesystem" Should I happily force the update, or should I do something different? I'm using Nvidia binary drivers, if that matters (since it has to do with GL:)) thanks in advance! Carotinho Chiacchiera con i tuoi amici in tempo reale! http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com

5 9

[arch-general] Request for hpacucli output from people running HP Smart Array controllers
by RedShift 05 Sep '09

05 Sep '09

Hello all I'm gathering the output of the hpacucli program from as much configurations as possible. If you can find some free time for me, can you send me the output of: hpacucli ctrl all show detail hpacucli ctrl slot=1 show config hpacucli ctrl slot=1 array all show hpacucli ctrl slot=1 array A show hpacucli ctrl slot=1 physicaldrive all show hpacucli ctrl slot=1 physicaldrive 2I:1:1 show hpacucli ctrl slot=1 logicaldrive all show hpacucli ctrl slot=1 logicaldrive 1 show Replace the slot=, array, physicaldrive and logicaldrive entries with what matches your specific setups (if possible, for all slots, arrays, physical and logical drives). I need as much as possible, normal working configurations and exotic setups like failed drives, arrays in rebuilding or failed state, hot-spares, etc... Much appreciated! Thanks, Best regards, Glenn

1 0

[arch-general] LDIF to abook
by Jozsef 04 Sep '09

04 Sep '09

I have my contacts from Thunderbird in .ldif format and my abook doesn't want to import from that file. Same with .csv This is the message I'm getting: Error occured while opening the file Any idea? I had some names written in cyrilic but I edited them with vim to latin and still no difference. -- Best, Jozsef Kurucity | Web & Graphic Designer +971 50 6783113 | jozefk(a)gmx.com

1 2

[arch-general] offlineimap went crazy
by Jozsef 04 Sep '09

04 Sep '09

Everything worked fine until I changed the .offlineimaprc to fetch mails from multiple accounts. Here is my .offlineimaprc : http://pastie.org/private/mlskz0tkpf6jgytj9d5q I comment out some lines because I thought they cause the problem. But now I see they don't. And this is what's happening after I run offlineimap in console : http://pastie.org/private/uaedovqzmbglgzlthnj4zg It works for a while and then crashing. What can be a problem then? Any suggestion? My .muttrc : http://pastie.org/private/aeke8sfcezwzfq0i1yrmg Google didn't help me. I tried. Thanks for all replies in advance! -- Best, Jozsef Kurucuty | Web & Graphic Designer +971 50 6783113 | jozefk(a)gmx.com

14 24

[arch-general] LaTeX problems ?
by Piyush P Kurur 03 Sep '09

03 Sep '09

Hi, latex which was fine till last update is having an unmet libpoppler dependency. When I tried to install libpoppler then the complaint was that they are not in the correct format. So I guess the following needs to be done. 1) Add libpoppler as a dependency to latex 2) recompile libpoppler with latest gcc which ever it is. I can file a bug report but since the server is down I will wait. Meanwhile did any one else also notice this problem ? Regards ppk

5 9

[arch-general] A little weirdness at boot time
by Andre Ramaciotti da Silva 02 Sep '09

02 Sep '09

Hi all! This email is divided in two parts: a curiosity and a problem. They are somewhat related, so I'm writing both together. The curiosity: Since I've installed Arch Linux in this notebook (in March), the time it takes to load the modules highly varies. With the current archinit scripts, it ranges from incredible 150ms to incredible 10 000ms. With the older archinit scripts, the time weren't exactly the same, but it did vary a lot, too. At first I thought a "cold boot" would take more than a reboot, but both things are completely unrelated: a cold boot can take only 150ms and a reboot 9 500ms and vice versa. I don't see this as a big problem, I'm just curious to know why. If anyone thinks I should report a bug, tell me what other kind of piece of information would be useful and I'll do it. The problem: Completely unrelated to the question above, the wireless card sometimes works, sometimes doesn't. It's unrelated because if the boot takes 150ms, the wireless may or may not work. The same applies if the boot takes 10 000ms. When I say it doesn't work, I mean that netcfg will fail and print an error: 'eth0: interface doesn't support scanning' Yes, I know it's weird, but I'm using the broadcom-wl module, and it sets eth0 as the wireless card. My cards: 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) and my MODULES array in /etc/rc.conf: MODULES=(!b43 lib80211_crypt_tkip wl ...) TIA, Andre

12 17

[arch-general] Howto adjust font scaling in Arch? All fonts look a bit big and fat?
by David C. Rankin 02 Sep '09

02 Sep '09

Listmates, I'm looking for a way to adjust the font size scaling (no not the control center font size) so all the fonts in my kde4 desktop look right. Basically, in Arch kde4 on my laptop, all fonts look 1pt too big. Case in point, on suse, I have all my desktop fonts set to 9pt, but with Arch, I have the size set at 8pt and they still look bigger than the suse fonts (same fonts of course, same subpixel hinting setting, etc...). Is there somewhere that some type of scaling is done that I can tweak to try and fix this? The effect of the larger scaling makes everthing from the kmail message list to the basket notepad fonts look cramped. Any thoughts? -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

10 15

Re: [arch-general] [arch-dev-public] Integrity Check i686 of core, extra 28-08-2009
by Henning Garus 02 Sep '09

02 Sep '09

On Sat, Aug 29, 2009 at 01:57:19PM +0200, Xavier wrote: > > Maybe there should be a separate simple tool comparing pkgbuild tree > vs pacman databases (vs packages on ftp/rsync) to make sure everything > is in sync. > But I will need some more details about what the information we > currently have to make this possible. > Afaik ftpdir-cleanup already takes care of the pacman databases vs ftp > packages part so we really just need the pkgbuild tree vs pacman > databases part to fill the gap. > Something like this? Generated from a recently synced ABS tree and latest DBs from ftp.archlinux.org . ================================================================================ Results for core ================================================================================ ================================================================================ Results for extra ================================================================================ Found in PKGBUILD tree, but not in DB: daemontools kdemultimedia-strigi-analyzer pwlib ================================================================================ Results for community ================================================================================ Found in DB but not in PKGBUILD tree: klogwatch png2ico urlgrabber Found in PKGBUILD tree, but not in DB: audacious-itouch-control cairo-docs clearlooks courier-pythonfilter dbus-glib-docs dillo-i18n ec-fonts-mftraced ftpmonitor kpacman nautilus-audio-convert perl-extutils-parsexs php-xdebug pyclamav pydns pyspf rkhunter syncekonnector tracker-gnome-search-tool twisted-words

4 8